471 / 62
Due R3 ARM
- Processor:AT91SAM3X8EA
- voltage: 3.3V
- Input voltage:7-12V
- Input voltage:6-20V Max
- Digit I/O port 54 pcs ( 12 PWM Output)
- Output current: 130mA
- 3.3V power supply pin can supply 00 mA current
- 512KB
- SRAM96 KB (two banks: 64KB and 32KB)
- Colock frequency:84 MHz
The Arduino Due Board has 12 analog inputs (pins from A0 to A11), each
of which can provide 12 bits of resolution (i.e. 4096 different values).
By default, the resolution of the readings is set at 10 bits, for
compatibility with other Arduino boards. It is possible to change the
resolution of the ADC with analogReadResolution(). The Due’s analog
inputs pins measure from ground to a maximum value of 3.3V.
Applying more then 3.3V on the Due’s pins will damage the SAM3X chip. The analogReference() function is ignored on the Due.
Microcontroller
|
|
AT91SAM3X8E |
| Operating Voltage |
|
3.3V |
| Input Voltage (recommended) |
|
7-12V |
| Input Voltage (limits) |
|
6-16V |
| Digital I/O Pins |
|
54 (of which 12 provide PWM output) |
| ADC Analog Input Pins |
|
12 x ADC 12 bit
|
| DAC Analog Outputs Pins |
|
2x DAC 12 bit
|
| Total DC Output Current on all I/O lines |
|
130 mA |
| DC Current for 3.3V Pin |
|
800 mA |
| DC Current for 5V Pin |
|
800 mA |
| Flash Memory |
|
512 KB all available for the user applications |
| SRAM |
|
96 KB (two banks: 64KB and 32KB) |
| Clock Speed |
|
84 MHz |
Tento produkt byl přidán dne Neděle 14. červen 2015.
