Description
Input voltage: 4.5-50V,
the volume of L 40 * W 21.5 * H 13.5mm (including potentiometers).
Input: IN+ input positive IN- input negative
Output: OUT+ output positive OUT- output negative
Adjustment
method: first correct input power (between 4.5-50V) then multimeter to
monitor the output voltage and adjust potentiometer (usually clockwise
turn boost, buck turn counterclockwise),
Output voltage: (3-35V) continuously adjustable (recommended load debugging).
Minimum pressure: 1.5V
Output current: rated current 2A, 3A maximum
Output Power: 15W maximum
Conversion efficiency: up to 92% (output voltage, the higher the efficiency)
Static power consumption is only about 6mA.
Connection: Welding, plus pin can be directly soldered after the PCB.
Operating temperature: Industrial grade (-40 to + 85 degrees Celsius)
Load regulation: ± 1%
Voltage
Regulation: ± 0.5% (mean time to achieve no-load output voltage will be
higher, but as long as there is with 1MA load, the output voltage will
be normal, does not affect the functionality, ease of use.)
Short circuit protection: current limiting, thermal protection, self-recovery.
Tento produkt byl přidán dne Středa 08. květen 2019.
