12V / 120W Digital Thermostat -50~110C LED Temperature Controller with Delay Start Temperature Calibration
Product Description
1. Temperature measurement range: - 50 ~ 110°C
2. Temperature control range: - 50 ~ 110°C
3. Temperature measuring accuracy: plus or minus 0.2 °C
4. Temperature control precision: plus or minus 0.1 °C
5. Measuring input: NTC10K L = 1 meters waterproof probe
6. Input power: according to the classification of choice
7. Output power: according to the classification of choice
8. Appearance size: about 60 * 45 * 31 mm / 2.36 * 1.77 * 1.22in
Package Include:1pcs Mini Temperature Controller
How to set
When connect to power supply, press the UP and DOWN buttons at the same time
more than 3 seconds, display show 888
If display LLL. means the sensor is fault, need to check the sensor.
If displat HHH, means the temperature is above the range
P0: Set Start temperature
Press
the setting button, enter the internal menu, the default display for
the P0, and then click the settings button, use up and down buttons to
set the starting temperature.
P1: set stop temperature
Press
the setting button, enter the internal menu, the default display for
the P0, use up and down button to change to P1, and then press the
settings button, use up and down buttons to set the starting
temperature
P2: Set temperature calibration
Press
the setting button, enter the internal menu, use up and down buttons
to change to P2, press the set button again, use the up and down button
to do the calibration.
If the detetion temperature is above the actual tempeature of 0.5°C , need to set the calibration temperature is 0.5°C
If the detetion temperature is below the actual tempeature of 1°C , need to set the calibration temperature 1°C
P3: Set delay start
Press
the setting button, enter the internal menu, use up and down buttons
to change to P3, press the set button again, use the up or down button
to set delay time( Minutes )
Tento produkt byl přidán dne Sobota 13. leden 2018.
