Špičkový měřící přístroj - osciloskop s vynikajícím frekvenčním, vzorkovacím rozsahem a extrémní pamětí pro vzorky. Nejlepší, co lze na současném trhu získat. Špičkový software s intuitivním ovládáním.
Key Features
- 2 analog channels
- USB 3.0 interface
- 100MHz bandwidth
- Up to 1GSa/s sample rate
- Up to 2Gbits hardware memory
- Ultra-portable size
- Unibody aluminum case
- 3-year warranty
Connectivity
- Main Type-C USB 3.0 interface
- Auxiliary Type-C USB interface
- BNC connectors (Standard Probe Interface)
- Extension interface (Pogo Pin Connector)
Power Source
- Power source voltage: 5VDC±5%
- Power consumption: 4W maximum
Input output ports
|
Direction |
Descriptions |
Protected Voltage Range |
| USB 3.0 port |
InOut |
Connect to host computer |
4.75v ~ 5.25v |
| Auxiliary USB power port |
Input |
Auxiliary power |
4.5v ~ 5.5v |
| BNC connectors |
Input |
Connect to probes |
-100v ~ +100v (DC+AC) |
| Extension interface |
InOut |
Extension probes and module |
0-3.3v |
| Probe compensator |
Output |
3v // ~1KHz square wave |
— |
Designed to make your work enjoyable
DSCope U3P100 is an USB-based digital oscilloscope, which has a
portable size (115x74x16mm), but powerful performance (up to 1GHz sample
rate, USB 3.0 interface). With the easy-to-use and cross platform
software, DSView, you can use your favorite computer to debug and
analysis your circuits, observe the analog wave and its frequency
spectrum at anywhere and anytime.
Technical Specifications
Vertical system
| Bandwidth: |
100MHz |
| Input coupling: |
DC or AC |
| Input impedance: |
1MΩ // ~16pF |
| Input sensitivity range: |
10mV/Div to 2V/Div |
| Vertical resolution: |
8bits |
| Maximum input voltage: |
peaks ≤ ±100V |
| DC gain accuracy: |
±6% |
| Vertical position range: |
±5 divisions |
| Vertical offset ranges: |
Volts/Div setting Offset rang
10mV/Div ~ 2V/Div ±100mV ~ ±20V/Div |
| Common mode rejection ratio(CMRR): |
— |
| Channel-to-channel isolation: |
— |
Horizontal system
| Maximum sample rate(single channel): |
1GSa/s |
| Maximum sample rate(dual channel): |
500MSa/s |
| Time base range: |
2ns/Div to 10s/Div |
Maximum duration of time
captured at highest sample rate (all channels): |
2ms (real-time capture)
200ms (single capture) |
| Record Length (real-time capture): |
1M (2 channels enabled)
2M (1 channel enabled) |
| Record Length (single capture): |
128M (2 channels enabled)
256M (1 channel enabled) |
Trigger system
| Trigger mode: |
Auto
Normal (ch0, ch1, ch0 & ch1, ch0 || ch1) |
| Trigger position range: |
1% ~ 99% of record length |
| Trigger holdoff range: |
1 us ~ 10 s |
| Trigger types: |
Edge (rising or falling) |
| Sensitivity: |
0 ~ 0.625 vertical division |
| Trigger level ranges: |
±4.4 vertical division from center screen |
Waveform measurements
| Cursors: |
Horizontal Width/Frequency/Period/Duty
Vertical Amplitude |
| Automated measurements: |
Frequency / Period / +Duty /- Duty / +Count
Rise / Fall / +Width / -Width / BrstW
Amplitude / High / Low / RMS / Mean
Pk-Pk / Max / Min / +Over / -OVer |
Waveform math
| FFT: |
Spectrum magnitude
Length: 1K ~ 16K
Vertical scale: Linear RMS or DBV RMS
Window: Rectangle, Hann, Hamming, Blackman, Flat_top |
| Math: |
Add / Subtract / Multiply / Divide |
Waveform display
| Time domain: |
Real-time viewSingle capture view |
| X-Y mode: |
Lissajous Figure |
System Requirements
- Windows XP, Vista, Win7, Win8 & Win10
- Mac OS X 10.12 or above
- Linux: recent Ubuntu, Fedora, Arch, etc.
- USB 3.0 Host port
What’s in the Box
- DSCope U3P100 (fully tested)
- x2 USB 3.0 cable(1.0M length, A to Type-C)
- x2 P2200 probes
- x1 Carrying Case
Related products
Tento produkt byl přidán dne Pátek 23. únor 2024.
